Fieldbus Board CP-602U-I

$0.00
9% Tax included Shipping calculated at checkout.

- CAN 2.0A and CAN 2.0B supported
- Two independent CAN communication ports
- CAN transfer rate up to 1 Mbps
- 2 KV optical isolation protection
- LED for transmit/receive status on each port
- Optional 120 ohm terminal resistor for CAN bus network
- DLL library and examples included
- Windows driver provided

 

Moxa CP-602U-I CAN (Controller Area Network) interface board supports the Universal PCI interface. As a stand-alone CAN controller, the CP-602U-I is a cost-effective solution that provides two active CAN controllers with a DB9 connector on the same board. Moxa CP-602U-I CAN interface board uses the NXP SJA1000 and transceiver PCA82C251 to provide the bus arbitration and error detection. Wide temperature (-40 to 85C) models and 2 KV isolation models are available.

Fieldbus Board CP-602U-I
Moxa

Fieldbus Board CP-602U-I

$0.00

- CAN 2.0A and CAN 2.0B supported
- Two independent CAN communication ports
- CAN transfer rate up to 1 Mbps
- 2 KV optical isolation protection
- LED for transmit/receive status on each port
- Optional 120 ohm terminal resistor for CAN bus network
- DLL library and examples included
- Windows driver provided

 

Moxa CP-602U-I CAN (Controller Area Network) interface board supports the Universal PCI interface. As a stand-alone CAN controller, the CP-602U-I is a cost-effective solution that provides two active CAN controllers with a DB9 connector on the same board. Moxa CP-602U-I CAN interface board uses the NXP SJA1000 and transceiver PCA82C251 to provide the bus arbitration and error detection. Wide temperature (-40 to 85C) models and 2 KV isolation models are available.

View product