Device Server NPort 5630-8

- 8 RS422/485 serial ports
- Standard 19-inch rackmount size
- 10/100M auto-sensing Ethernet
- Built-in 15 KV ESD protection for all serial signals
- Easy IP address configuration with LCD panel
- Choice of configuration methods: Web console, Telnet console and Windows utility
- Versatile socket operation modes, including TCP Server, TCP Client, UDP and Real COM
- SNMP MIB-II for network management

Moxa NPort 5630-8 rackmount device server can conveniently and transparently connect up to 8 serial RS422/485 devices to an Ethernet, allowing you to network your existing serial devices with only basic configuration. Moxa NPort 5630-8 device servers come with Tx/Rx LEDs for the serial ports on the front panel, and 8 RJ45 serial port connectors on the rear panel. NPort 5630-8 is suitable for a standard 19-inch rackmount, allowing users to simplify operational, maintenance and administrative tasks. Data transmission between the serial and Ethernet interfaces is bi-directional. By using NPort device servers, you not only protect your current hardware investment, but also allow for future network expansion. You can both centralize the management of your serial devices, and distribute management hosts over the network.

Real COM/TTY Ports
Real COM/TTY drivers are provided to make serial ports on Moxa NPort 5630-8 recognizable as Real COM ports by Windows, or Real TTY ports by Linux. In addition to supporting basic data transmission and reception, NPort drivers also support RTS, CTS, DTR, DSR, and DCD control signals.

LED Indicators to Ease Your Maintenance Tasks
The System LED, serial Tx/Rx LEDs, and Ethernet LEDs (located on the RJ45 connector) provide a great tool for basic maintenance tasks and help engineers analyze problems in the field. The LEDs not only indicate current system and network status, but they also help field engineers monitor the status of attached serial devices.