Enjoy free SG delivery over S$500 and local technical support

MOXA MGate MB3170-G2 / MB3270-G2 / MB3470-G2

Robust Security,
Seamless Upgrade

Secure Protocol Conversion for Modern OT Networks

More value from every connection

Why move to MGate G2?

Strengthen your system with better protection, clearer monitoring and simpler connection management.

Security from startup

Hardware Secure Boot checks firmware before it runs, giving your gateway a stronger foundation.

  • Verifies authorised firmware at startup
  • Designed around IEC 62443-4-2 requirements

Access data faster. Find faults sooner.

Agent Mode collects data in the background. Built-in browser tools help identify communication problems across your system.

  • Retrieve the latest stored data
  • Test Modbus devices from the gateway

Built for your next system upgrade

New port and wiring options give your system more ways to connect with the MB3x70 G2 range.

  • New four-port and plug-in fibre options
  • Terminal-block choices on two- and four-port models
Your next gateway

Same job. More capability with G2.

Upgrade your Modbus connections with stronger protection, easier management and more connection options. Here is what G2 adds to your system.

What mattersMGate G1MB3170 / MB3270Move to MGate G2MB3170-G2 / MB3270-G2 / MB3470-G2
Form factor
  • 1 or 2 serial ports
  • DB9 serial connectors
  • 10/100M fibre: M-SC, M-ST, S-SC
  • 1, 2 or 4 serial ports
  • DB9; terminal-block options on 2- and 4-port models
  • 10/100M fibre: M-SC, M-ST, S-SC; adds SFP options
Protocol SupportModbus TCP/RTU/ASCIIModbus TCP/RTU/ASCII; adds proprietary serial support
Operation ModesTransparent mode conversionTransparent and Agent mode conversion
SecurityAuthentication and security protocols for MGate management; configuration encryptionHardware-based Secure Boot and security features compatible with IEC 62443-4-2
Network ArchitectureSingle subnet (switch)Single subnet (switch); adds dual subnet
TroubleshootingTraffic monitor via utility
  • Web-based tools: advanced traffic monitoring, protocol diagnostics, Modbus testing simulator, one-click information download and fibre diagnostics
  • Serial port monitoring: web interface and Moxa MXview One

Options depend on the exact model and operating mode. Agent Mode serves cached data, so polling settings determine how current it is. TNS can check your equipment, wiring and software before the swap.

Start with one gateway. Ask TNS about an MGate G2 trial for your existing system.

Enquire About a G2 Trial
One family. More connection choices.

Choose your ports. Make the move.

Match your existing serial lines or make room for more with the new four-port option.

1 serial port MOXA MGate MB3170-G2 Series one-port Modbus gateways

Upgrade one serial line.

MGate MB3170-G2

Bring G2 security and diagnostics to a single serial connection.

2 serial ports MOXA MGate MB3270-G2 Series two-port Modbus gateways

Connect two serial lines.

MGate MB3270-G2

Give two separate serial lines the benefits of one G2 gateway.

See how it works

Meet your next Modbus gateway.

See how MGate G2 connects, monitors and manages communications within your system.

Make your next gateway a G2

Put MGate G2 to work
in your system.

Send TNS your current MGate model number and what it connects. Ask us to match a G2 replacement and discuss a trial.

Enquire About an MGate G2 Trial
Appendix · MGate G2 FAQs

Your MGate G2 questions, answered.

Explore your model options and what G2 can do for your system.

What is the difference between MB3170-G2, MB3270-G2 and MB3470-G2?

The main difference is the number of serial ports: MB3170-G2 has 1, MB3270-G2 has 2, and MB3470-G2 has 4. Choose the capacity your system needs, with the new four-port option providing more connections in one gateway. The two- and four-port models also support serial redirection between Modbus serial clients and servers. Agent Mode data capacity varies by model, as shown below.

Does the SFP model support third-party SFP modules?

Yes, third-party 10/100 Mbps SFP modules are supported. The web console identifies non-Moxa modules, and fibre diagnostics may show incomplete information when these modules are used.

How much data can G2 store in Agent Mode?

Agent Mode caches device data in the gateway for quicker replies to your system. Supported capacity depends on the model:

ModelTagsTotal tag size
MB3170-G2 · 1 port1502,048 bytes
MB3270-G2 · 2 ports3003,072 bytes
MB3470-G2 · 4 ports6004,096 bytes
Can Modbus serial and proprietary serial devices connect to Modbus TCP at the same time?

Yes. In Agent Mode, multi-port models MB3270-G2 and MB3470-G2 can convert both Modbus serial and supported proprietary serial communications to Modbus TCP for a SCADA client at the same time. TNS can help check your device protocol before you select a model.

Get in touch